HD52505UV
MFI 3313 is a medium density polyethylene, which has a broad molecular weight distribution and high melt strength.
Description
HD52505/HD52505UV
High Density Polyethylene
Product Description
52505 is a HDPE copolymer which is manufactured in gas phase process. This grade is an injection molding grade for applications requiring a good physical property even at low temperatures, like pails, containers and technical moldings.
Applications:
Containers.
Characteristic Properties
Good physical property even at low temperatures.
| Resin Properties | Unit | Typical Value | Test Method |
| Melt Index (190°C/ 2.16Kg) | (g/10 min) | 5 | D1238 |
| Density | g/ml | 0.952 | D1505 |
| Thermal Properties @ | Unit | Typical Value | Test Method |
| Vicat Softening Point | (°C) | 124 | D1525 |
| Moulded Properties @ | Unit | Typical Value | Test Method |
| Flexural Modulus | (MPa) | 1200 | D790 |
| Tensile Strength at yield | (MPa) | 27 | D638 |
| Tensile Strength at break | (MPa) | 13 | D638 |
| H.D.T | (°C) | 67 | D648 |
| Notched Izod Impact @ 23 °C | (J/m) | 29 | D256/A |
Density: 0.950-0.954 MFI: 4-6
Handling and Health Safety
Molten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to prevent possible thermal injuries. Also appropriate ventilation is suggested in working by melt polymer. Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard probability. So adequated filters and grounding exists at all time are recommended.
Storage
Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don’t exceed 50 °C. Under cool, dry, dark conditions Jam Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. We would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery
Packaging
Polymers Polyolefin resins are supplied in Pellet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades.
Additional information
| MFI (dg/min): |
5 (190°C/ 2.16Kg) |
|---|---|
| Density (kg/m3): |
952 |
| Application(s): |
Containers |
Delivery Terms
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
Order Now
Downloads
TDS : Download
MSDS: Download
