BL3
HF-4760 (BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer.
BL3
High Density Polyethylene, Blow molding
Applications:
- Small blow moulding,
- Bottles
- Containers (up to 5 lit)
- Packaging of pharmaceuticals & surfactants
| Resin Properties | Unit | Value | Test Method |
| Mass density (23℃) | g/cm3 | 0.945 | ISO 1183 |
| Melt Flow Rate ( 190℃/ 5.06kg) | (g/10 min) | 1.2 | ISO 1133 |
| Melt Flow Rate ( 190℃/ 21.16kg) | (g/10 min) | 23 | ISO 1133 |
| FRR | – | 19 | |
| Impact Strength (23℃) | Mj/mm2 | 10 | ISO 179/1eA |
| Swell ratio | % | 120 | MPC-test |
| Flexural Creep Modulus (4 Point, 1 min) | Mpa | 1300 | DIN 19537-2 |
| Tensile Modulus (23℃, v=1mm/min, secant) | Mpa | 1250 | ISO 527 |
| Strength at Break | Mpa | 32 | ISO 527 |
| Elongation at Break | % | >600 | ISO 527 |
| Elongation at Yield | % | 10 | ISO 527 |
| Softening Temperature | C | 77 | ISO 306 |
| BrittleTemperature | C | <-80 | ASTM D746-72 |
| Shore D hardness | 62 | ISO 868 | |
| ESCR in full notch creep test (80℃, 2%Arcopal) | h@3.5 MPa | 5 | ISO CD 16770 |
| MFI (dg/min): |
1.2 (190°C /5 kg) |
|---|---|
| Density (kg/m3): |
945 |
| Application(s): |
Small blow moulding, Bottles, Containers (up to 5 lit), Packaging of pharmaceuticals & surfactants |
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
TDS : Download
MSDS: Download
