LL0209AA/KJ
LL0209AA & LL0209KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.
Description
LL0209AA / LL0209KJ
Linear Low Density Polyethylene
Main application & Characteristics:
LL0209AA & LL0209KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.
LL0209AA & LL0209KJ are suitable for general purpose films, neat or in lean blends with LDPE and other ethylene polymers. Lean blends applications include sacks of all types, FFS and agricultural films.
In lean blends they offer the following advantages:
- Greater draw down.
- Improved hot-tack and lower seal shrinkage.
- Better tear resistance.
- Higher tensile stress and elongation at break.
LL0209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance.
If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
LL0209AA & LL0209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.
Recommended melt temperature for extrusion is about 180°C – 225°C.
* LL0209AA & LL0209KJ are suitable for food contact.
| Typical properties | Test method (ASTM) | Unit | Value |
| Resin | |||
| MFI@190°C, 2.16 kg | D1238 | gr/10min | 0.9 |
| Density | D2839 | gr/ml | 0.920 |
| Vicat Softening Point | D1525 | °C | 100 |
| Film * | |||
| Tensile Strength@Yield, MD/TD | D638 | Mpa | 10.5/11 |
| Elongation@Break, MD/TD | D638 | % | 620/840 |
| Tensile Strength@Break, MD/TD | D688 | Mpa | 41/32 |
| Tear Strength, MD/TD | D1922 | gr/25mic | 145/370 |
| Impact Strength, Dart | D1709 | gr | 150 |
| Haze | D1003 | % | 10 |
| Gloss (45°) | D2457 | Rating | 56 |
Values shown are typical which are not to be considered as product specifications.
* 38 microns, 2:1 Blow ratio / MD=Machine Direction, TD=Transverse Direction
Additional information
| MFI (dg/min): |
0.9 (190°C, 2.16 Kg ) |
|---|---|
| Density (kg/m3): |
920 |
| Application(s): |
general purpose films, neat or in lean blends with LDPE and other ethylene polymers. |
Delivery Terms
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
Order Now
Downloads
TDS : Download
MSDS: Download
