HD52518
52518 is a HDPE copolymer for Injection Moulding for applications requiring a good balance between easy of processability and flowability and mechanical properties.
Description
HD52518
High Density Polyethylene
Product Description
52518 is a HDPE copolymer for Injection Moulding for applications requiring a good balance between easy of processability and flowability and mechanical properties.
Applications:
- Housewares
- High fluidity
- Injection moulding grade
Characteristic Properties
Good balance between easy of processability and flowability
Additives
- Thermal Antioxidant (Process Stabilizer) • Catalyst neutralizer (acid scavenger, lubricant)
| Resin Properties | Unit | Typical Value | Test Method |
| Melt Index (190°C/ 2.16Kg) | (g/10 min) | 18 | D1238 |
| Density | g/ml | 0.952 | D1505 |
| Thermal Properties @ | Unit | Typical Value | Test Method |
| Vicat Softening Point | (°C) | 121 | D1525 |
| Moulded Properties @ | Unit | Typical Value | Test Method |
| Flexural Modulus | (MPa) | 1200 | D790 |
| Notched Izod Impact @ 23 °C | (J/m) | 19 | D256/A |
| Density: 0.950-0.954 MFI: 16-20 @ on compression moulded specimen, according to ASTM D 1928°C | |||
Handling and Health Safety
Molten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to prevent possible thermal injuries. Also appropriate ventilation is suggested in working by melt polymer. Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard probability. So adequated filters and grounding exists at all time are recommended.
Storage
Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties. The Storage area should be dry and preferably don’t exceed 50 °C. Under cool, dry, dark conditions Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. We would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery.
Packaging
Polymers Polyolefin resins are supplied in Pellet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades
Additional information
| MFI (dg/min): |
18 (190°C/ 2.16Kg) |
|---|---|
| Density (kg/m3): |
952 |
| Application(s): |
Housewares, High fluidity, Injection moulding grade |
Delivery Terms
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
Order Now
Downloads
TDS : Download
MSDS: Download
