HD60507UV
60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties.
Description
HD60507/HD60507UV
High Density Polyethylene
Product Description
60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties. This resin is well suited for general purpose application requiring high stiffness.
Applications:
- Crates
- Injection molding grade
Characteristic Properties
- Good flowability with balanced
- phisycal propertie
Additives:
- HD-60507:
- Thermal Antioxidant (Process Stabilizer)
- Catalyst neutralizer (acid scavenger, lubricant)
- HD-60507UV:
- Thermal Antioxidant (Process Stabilizer)
- Catalyst neutralizer (acid scavenger, lubricant)
- UV Stabilizer
| Resin Properties | Unit | Typical Value | Test Method |
| Melt Index (190°C/ 2.16Kg) | (g/10 min) | 7.5 | D1238 |
| Density | g/ml | 0.958 | D1505 |
| Resin Properties @ | Unit | Typical Value | Test Method |
| Vicat Softening Point | (°C) | 126.5 | D1525 |
| Moulded Properties @ | Unit | Typical Value | Test Method |
| Flexural Modulus | (MPa) | 1450 | D790 |
| Notched Izod Impact @ 23 °C | (J/m) | 24 | D256/A |
Handling and Health Safety
Molten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to prevent possible thermal injuries. Also appropriate ventilation is suggested in working by melt polymer. Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard probability. So adequated filters and grounding exists at all time are recommended.
Storage
Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don’t exceed 50 °C. Under cool, dry, dark conditions Jam Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. We would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery
Packaging
Polymers Polyolefin resins are supplied in Pellet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades
Additional information
| MFI (dg/min): |
7.5 (190°C/ 2.16Kg) |
|---|---|
| Density (kg/m3): |
958 |
| Application(s): |
Crates, Injection molding grade |
Delivery Terms
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
Order Now
Downloads
TDS : Download
MSDS: Download
