EX5
HM-9450F (EX5) is blown film grade resin which is manufactured by suspension polymerization of ethylene monomer.
EX5
High Density Polyethylene
Product Description
HM-9450F (EX5) is blown film grade resin which is manufactured by suspension polymerization of ethylene monomer. HM-9450F (EX5) is a bi-model high density polyethylene with 1-Butene as co monomer.
Applications:
For blown films with paperlike quality, sutable for counter bags, carrier bags and wrapping films, excellent processing.
Characteristic Properties
| Test/Composition | Typical Value | Unit | Method |
| Density | 0.949 | g/cm3 | ISO1183 |
| Fish Eye Note | ≤3 | note | Internal |
| FRR 21.6/5 | 29 | ||
| MFR 190°C /21.6 | 8.0 | g/10min | ISO1133 |
| MFR190°C /5 | 0.28 | g/10min | ISO1133 |
High molar mass film grade, good stiffness and tenacity
- Test specimen from compression moulded sheet at 23°C.
- FRR values are statistical and calculated by dividing MFR values.
- Notch Impact Test specimen from compressed moulded sheet 23°C and The data quoted are average values
Handling and Health Safety
Molten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to prevent possible thermal injuries. Also appropriate ventilation is suggested in working by melt polymer. Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard probability. So adequated filters and grounding exists at all time are recommended.
Storage
Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don’t exceed 50 °C. Under cool, dry, dark conditions Jam Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. JPC would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery.
Packaging
Jam Polymers Polyolefin resins are supplied in Pellet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades.
| MFI (dg/min): |
8 (190 °C/2.40 Kg) |
|---|---|
| Density (kg/m3): |
949 |
| Application(s): |
For blown films with paper like quality, suitable for counter bags, carrier bags and wrapping films, excellent processing. |
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
TDS : Download
MSDS: Download
