HEX 4460 PE80
HEX 4460 PE80+ is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion.
Description
HEX 4460 PE80+
High Density Polyethylene
Product Description
HEX 4460 PE80+ is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion. This grade, which is produced by 1-hexene co-monomer, is classified as PE 80+ and provides excellent stress crack resistance properties (ESCR) combined with very good long-term hydrostatic strength and good process-ability.
| Typical Properties | Typical Value 1 | Unit | Test Method |
| Physical | |||
| High Load Melt Flow Index (190oC/ 21.6 kg) | 6.0 | g/10 min | ISO 1133 |
| Melt Flow Index (190oC/ 5.0 kg) | 0.33 | g/10 min | ISO 1133 |
| Density 2 | 0.944 | g/cm3 | ISO 1183 |
| Mechanical 3 | |||
| Tensile Strength at Yield | 25 | MPa | ISO 527-1, -2 |
| Elongation at Yield | 11 | % | ISO 527-1, -2 |
| Elongation at Break | > 1000 | % | ISO 527-1, -2 |
| Tensile Strength at Break | 40 | MPa | ISO 527-1, -2 |
| Tensile Modulus of Elasticity | 700 | MPa | ISO 527-1, -2 |
| Flexural Modulus – 1% Secant | > 1000 | MPa | ASTM D790 |
| ESCR F10 (10% Igepal, Method B) | > 1000 | hrs | ASTM D1693 |
| FNCT (3.5 MPa, 2% Arkopal N100, 80oC) | > 120 | hrs | ISO 16770 |
Conformance Testing 4
| Minimum Required Strength (MRS) | > 8.0 | MPa | ISO 9080 |
| Hydrostatic Pressure Test (9.0 MPa @ 20oC) | > 100 | hrs | ISO 1167 |
| Hydrostatic Pressure Test (4.6 MPa @ 80oC) | > 165 | hrs | ISO 1167 |
| Hydrostatic Pressure Test (4.0 MPa @ 80oC) | > 1000 | hrs | ISO 1167 |
| Resistance to Slow Crack Growth (4.0 MPa @ 80oC) | > 500 | hrs | ISO 13479 |
| Resistance to Rapid Crack Propagation (6 bar @ 0oC) | > 10.0 | mm | ISO 13477 |
| Impact | |||
| Tensile Impact Strength (Notched, Type 1, Method A, -30oC) | 167 | kJ/m2 | ISO 8256 |
| Izod Impact Strength (Notched, Method A, 23oC) | 26 | kJ/m2 | ISO 180 |
| Thermal | |||
| Melting Temperature | 129 | oC | ISO 3146 |
| Oxidation Induction Time (200oC) | > 30 | min | ISO 11357 |
| Vicat Softening Temperature (Method A/ 10N) | 126 | oC | ISO 306 |
| Deflection Temperature Under Load (0.45 MPa) | 68 | oC | ISO 75 |
| Deflection Temperature Under Load (1.8 MPa) | 50 | oC | ISO 75 |
| Recommended Process Conditions 5 | |||
| Processing Method | Pipe Extrusion | ||
| Extruder Barrel Temperature: 200-230 °C | Melt Temperature: 205-240 °C | ||
- Typical values: these are not to be construed as
- The density parameter was determined on compression-molded specimens, which were prepared in accordance with procedure C of ASTM D4703, Annex A1.
- Properties are based on compression-molded specimens, which were prepared in accordance with procedure B of ASTM D4703, Annex A1, using 100% HEX 4460 PE80+ resin.
- Values were obtained on 110mm, SDR11 pipe made with 100% HEX 4460 PE80+.
- Please note that, these processing conditions are recommended by manufacturer only for 100% HEX 4460 PE80+ resin (not in the case of blending with any other compatible material), therefore because of the many particular factors which are outside our current knowledge and control and may affect the use of product, no warranty is given for the foregoing data. Moreover, the specific recommendations for resin type and processing conditions can only be made when the end use, required properties and fabrication equipment are known.
Additional information
| MFI (dg/min): |
6 (190oC/ 21.6 kg) |
|---|---|
| Density (kg/m3): |
952 |
| Application(s): |
Drinking Water Pipe, Drainage Pipe, Plumbing |
Delivery Terms
Petroduct offers flexible international shipping options tailored to customer needs. Available delivery terms include:
FCA (Free Carrier)
CPT (Carriage Paid To)
FOB (Free On Board)
CFR (Cost and Freight)
All shipments are coordinated from designated ports with standard packaging and full compliance with customs and logistics requirements. For optimal delivery planning, please consult our sales team when placing your order.
Order Now
Downloads
TDS : Download
MSDS: Download
