petroduct-Portfolio

LIM 1922 is a low-density polyethylene, offering a unique combination of consistent process-ability, flexibility and toughness.

Lupolen 2420 D is a non-additivated, low density Polyethylene. It is delivered in pellet form..

Lupolen 2420 F is a non-additivated, low density Polyethylene. It is delivered in pellet form.

Lupolen 2420 H is a non-additivated, low density Polyethylene. It is delivered in pellet form.

HD3840UA is a linear, UV stabilized virgin medium density polyethylene copolymer grade

52528 is a HDPE copolymer injection molding grade for thin walled applications requiring a good balance between high flowability and physical properties.

F 7000 is a film grade known for its high quality film applications.

F 7000 is a film grade known for its high quality film applications.

F 7000 is a film grade known for its high quality film applications.

HDPE 7700M is a natural, bimodal technology, high density polyethylene classified as a MRS 10.0 material (PE100) providing superior in mechanical properties and processability.

Acrylonitrile Butadiene Styrene Copolymer is produced in 70 grades including general purpose, special grades, heat resistant, flame retardant and antistatic

Acrylonitrile Butadiene Styrene Copolymer is produced in 70 grades including general purpose, special grades, heat resistant, flame retardant

Acrylonitrile Butadiene Styrene Copolymer is produced in 70 grades including general purpose, special grades, heat resistant, flame retardant

Increase the flexibility and workability of polymers. Commonly used in PVC to make it softer and more pliable.

Increase the flexibility and workability of polymers. Commonly used in PVC to make it softer and more pliable.

ARMCRP100B are high molecular weight high density polyethylene copolymers, developed as general purpose resin for use in pressure and non-pressure pipes.

HF-4760 (BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer.

HF-4760 (BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer.

Increase the flexibility and workability of polymers. Commonly used in PVC to make it softer and more pliable.

DIETHANOLAMINE obtained from the reaction between ammonia and ethylene oxide.

DIETHYLENEGLYCOL obtained from the reaction of ethylene oxide and MEG.

DIETHYLENEGLYCOL obtained from the reaction of ethylene oxide and MEG.

“EX3” is a natural colored high density polyethylene with butene-1 as comonomer.

"EX 5" is a high density polyethylene with 1-Butene as co monomer.

HM-9450F (EX5) is blown film grade resin which is manufactured by suspension polymerization of ethylene monomer.

F-1000 is an expandable polystyrene (EPS) resin which contains pentane gas as foam blowing agent and Non-HBCD brominated hydrocarbon as its flame retardant agent.

F-2000 is an expandable polystyrene (EPS) resin which contains pentane gas as foam blowing agent and Non-HBCD brominated hydrocarbon as its flame retardant agent.

F-3000 is an expandable polystyrene (EPS) resin which contains pentane gas as foam blowing agent and Non-HBCD brominated hydrocarbon as its flame retardant agent.

F-4000 is an expandable polystyrene (EPS) resin which contains pentane gas as foam blowing agent and Non-HBCD brominated hydrocarbon as its flame retardant agent.

Polystyrene is one of petrochemical products widely used in various industries, which is produced though polymerisation of monomer styrene.

Polystyrene is one of petrochemical products widely used in various industries, which is produced though polymerisation of monomer styrene.

Polystyrene is one of petrochemical products widely used in various industries, which is produced though polymerisation of monomer styrene.

Polystyrene is one of petrochemical products widely used in various industries, which is produced though polymerisation of monomer styrene.

Polystyrene is one of petrochemical products widely used in various industries, which is produced though polymerisation of monomer styrene.

Polystyrene is one of petrochemical products widely used in various industries, which is produced though polymerisation of monomer styrene.

Increase the flexibility and workability of polymers. Commonly used in PVC to make it softer and more pliable.

Increase the flexibility and workability of polymers. Commonly used in PVC to make it softer and more pliable.

General purpose polystyrene GPPS 1028 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1028 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1038 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1047 is a high molecular weight crystal polystyrene which allows maximum dilution rates with high impact polystyrene grades.

General purpose polystyrene GPPS 1067 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1077 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1084 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1115 is manufactured by continuous mass polymerization of styrene monomer.

General purpose polystyrene GPPS 1144 is manufactured by continuous mass polymerization of styrene monomer.

GPPS1160 is a high heat resistance and molecular weight crystal polystyrene for extrusion and bioriented polystyrene (OPS) industry

This grad is high strendth and high cycle polystyrene.

General purpose polystyrene GPPS 1233 is manufactured by continuous mass polymerization of styrene monomer.

GPPS 1460 is a high heat resistance and molecular weight crystal polystyrene for extrusion and thick walled injection moulding application.

This grad is high strendth and high cycle polystyrene.

GPPS1540 is an easy flowing crystal polystyrene designed for extrusion or injection applications.

HB0035 is a high molecular weight high density polyethylene blow moulding grade combining blow moulding extrusion behavior and superior mechanical properties.

HBM 5510 is a high density polyethylene, specially developed for large parts blow molding

Hydrochloric acid is a solution of hydrogen chloride (HCl) in water, that is a highly corrosive, strong mineral acid with many industrial uses.

HD-6070EA is a high density polyethylene injection moulding grade with a narrow molecular weight distribution.

HD3840UA is high density polyethylene copolymer containing butene-1(C4) as comonomer.

HD3840UA is high density polyethylene copolymer containing butene-1(C4) as comonomer.

HD-5000S is a HDPE grade, specially designed for monofilament applications, which combines good processability with high tenacity.

HD5030SA is high density polyethylene copolymer containing butene-1(C4) as comonomer with medium content of slip agent additive.

HD5030SA is high density polyethylene copolymer containing butene-1(C4) as comonomer with medium content of slip agent additive.

MFI 3313 is a medium density polyethylene, which has a broad molecular weight distribution and high melt strength.

52518 is a HDPE copolymer for Injection Moulding for applications requiring a good balance between easy of processability and flowability and mechanical properties.

52518 is a HDPE copolymer for Injection Moulding for applications requiring a good balance between easy of processability and flowability and mechanical properties.

60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties.

HEX 4460 PE80+ is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion.

HF-4760 (BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer.

HFI 5110 is a high molecular weight, high-density polyethylene with broad molecular weight distribution and 1-hexene as a co-monomer, specially developed for producing thin films with excellent strength and rigidity.

HIPS-4125 gives excellent processing in injection with good finished product dimensional stability.

HIPS-7055 (ESCR) gives excellent processing in extrusion.

HIPS7240 is a very high impact polystyrene for the extrusion industry.

HM-9450F (EX5) is blown film grade resin which is manufactured by suspension polymerization of ethylene monomer.